|
Inputs ( & Display range )
1)Current, 4 – 20 mA DC/ 0 – 20 mA DC ( -1999 to 9999)
2)Voltage, 1 – 5V/0 – 10V (-1999 to 9999 )
3)RTD Pt 100 – 3 wire ( -100.0 to 600.0 C )
4)T/C Type J (-100 to 800 C )
5)T/C Type K (0 to 1200 C )
6)T/C Type R (0 to 1760 C )
7)T/C Type S (0 to 1700 C )
8)T/C Type T (-100 to 400 C )
9)T/C Type B ( 450 to 1820 C)
10)T/C Type E ( -100 to 1000 C )
11)T/C Type C ( 0 to 2315 C )
12)Ohms-0-10K ohms ( -1999 to 9999 )
13)mV DC
14)UNIVERSAL type 1 – 1…8 of above
15)UNIVERSAL type 2 – 1…13 of above
16)Pulse train input. ( open collector type )
17)–10 to 10 V DC / -mV to mV DC ( -1999 to 9999)
18)RTD – Cu 53 ( -100 to 200 C )
19)Special type of inputs of any V/Current/Resistance
( However on factory confirmation only )
Decimal point configurable for linear inputs
T/C temperature displays without decimal point
Input impedance
200 KΩ for Voltage, mV & T/C inputs
upto 250 ohms for current inputs
Display resolution
3 digit
4 digit
* Display range is the virtue of its resolution
Display accuracy
+/- 0.1% of span
Alarms
Maximum 4 nos. of potential free contacts
Setpoint Display
Optional on a resolution of 3 or 4 digit
Analog output
Maximum 2 nos. of any of below
1)Isolated / Non Isolated 4 – 20 mA DC
2)Isolated / Non Isolated 0-10 V DC
3)Other types on factory confirmations
Analog output load capability
800Ω maximum for current outputs |
|
Output accuracy
+/- 0.1% of span
Serial output with open protocol
1)RS232 With modbus RTU protocol
2)RS485 with modbus RTU protocol
Note: Any other protocol on demand
Transmitter power
24 V DC for current inputs
10/12 V DC ( in case of Load cell / Proximity application )
Specials
Power supply
1)24 V DC
2)110 V AC, 50 Hz, +/- 10%
3)230 V AC, 50 Hz, +/- 10%
4)90-270 V AC, 50 Hz. – SMPS
5)Specials
Security
Single level Password protected
Contact ratings
230 V AC, 5 Amps.
Power consumption
3 VA max.
Ambient temperature
0 – 50° C.
Storage temperature
0 – 70° C.
Humidity
90% RH (non-condensing)
Enclosures
Weatherproof, Flameproof and all other standard types
Mounting
Panel / Wall / Field / Dinrail / Eurocard / Specials
Dimensions
96*96 / 96*48 / 72*72 / 48 * 48 / 72*144 / SPECIALS
*All config/calibration from front keys only
Following table describes the availability of several models with the company right now. A general preview is only presented
to the user. The dimensional and display sizes are the relational virtues of each other and hence the user is always
requested to clarify the specifications of instrument with the factory prior to placement of the order.
On confirmation with factory, changes of all types in all specifications is possible.
|
