Manufacturers of Process
Control Instruments
We are an eminent Manufacturer and exporters of Process Control Instruments. Our Quality Instrumentation Products have already remained TIME PROVEN.
Dual Channel Flow Indicators " Totalizers � Predefined Inputs-846V
 
 
 
7630
( 72 * 144 – Panel mount )
spadcer pdf spadcer
 
  • Rugged & Time Proven Designs
  • Microprocessor type and Fully Configurable
  • Accepts Single type Predefined i/p per channel
  • Relay ON/OFF outputs on FLOW RATE given
  • Retransmission output on FLOW RATE given
  • FLOW RATE to the resolution of 4/4.5 digits
  • 8 digit TOTALIZER capacity
  • Optional Engineering Unit display
  • Transmitter P.S. @ 24 V DC for each channel
  • Various sizes / Mountings / Enclosures supported
  • RS485 based Communication output provided
 
Model 846V DUAL CHANNEL FLOW INDICATORS / CONTROLLERS � Single Flow signal input per channel.

( Microprocessor based & Fully Configurable )

 

Introduction

 

Pantech Instrument’s Model 846V represents DUAL CHANNEL FLOW INDICATORS / TOTALIZERS / CONTROLLERS for flow applications where single flow signal is available per channel. Based on the flow application and the type of flow data signal, this model can be used in VOLUMETRIC and MASS flow measurements, both. The instrument on each of its channel accepts any predefined linear type of signal, and converts it into INSTANTANEOUS FLOW RATE to a resolution of 4/4.5 digits. TOTALIZED value for each of the channel is displayed through 8 digits red LED and this totalizer value is always protected against power failures through internal memory structures of microprocessor. Optionally the instrument is designed to give two contact relay outputs and a RETRANSMISSION ISOLATED signal on INSTANTANEOUS FLOW RATE per channel. Serial communication outputs for computer system interfaces are also given optionally. All configurations, calibrations and output fine tunings etc. can be performed by front four keys only without opening the instrument. In the core of all the functions lies the latest and highly proven microprocessor based chipsets. The high end softwares ensure the most user friendly interactions by the user. The instrument incorporates low drift operational amplifiers and industrial grade components for long trouble free operation. Burn in of each module ensures long trouble free operations.

Model 846V :

  1. Is to be used when a single flow signal input is there for two particular flow applications. Application can be a VOLUMETRIC / MASS type, depending upon the system design and type of flow transmitter signal output.

  2. For each channel the user is allowed to feed in - FLOW RANGE for display, COUNTS/Hr., FLOW TYPE, FLOW RANGE for retransmission. For Pulse input, the user has to feed in K factor

  3. In case the user wishes to calculate MASS FLOW with three inputs of : FLOW, PRESSURE, TEMP., then the user should look out for our model no. : 845G, 845N, 845S.

 
Specifications
 
Input ( single flow transmitter signal )

Current – 4-20 mA / 0-20 mA DC / Specials

Voltage – 0-10 V DC / Specials

Pulse of standard 12 V DC

Other type on Factory Confirmation

 

Calculations possible for FLOW RATE

Square root

Linear

* Both options configurable by front keys

 

Analog output
  1. Isolated / Non Isolated 4 – 20 mA DC

  2. Isolated / Non Isolated 0-10 V DC

  3. Other types on factory confirmations

* 4-20 mA DC o/p @ 800 ohms load

 

Contact output

Maximum 2 sets of C,NC,NO on FLOW RATE

 

Serial output / MODEM CONNECTIVITY

  1. RS232 With modbus RTU or ASCII protocol

  2. RS485 with modbus RTU or ASCII protocol

  3. Modem connectivity with central software

  4. GSM (Mobile) connectivity

 

Display (any one type)

  1. 4 digit red LED for Instant flow rate, 4 digit green LED for Engg. Unit display, 8 digit red LED for totalized value ( LED size : 0.25” ) ( Engg. Units selectable )

  2. 4.5 digit red/green LED instant flow ( LED size : 0.5” ) & 8 digit red LED totalized ( LED size : 0.25” )

  3. LCD display

 

Accuracy

+/-0.1% of span

 

Transmitter Power

24 V DC @ 40 mA

Other types on factory confirmations

 

Power supply
  1. 24 V DC

  2. 110 V AC, 50 Hz, +/- 10%

  3. 230 V AC, 50 Hz, +/- 10%

  4. 90-270 V AC – SMPS type

  5. Specials on factory confirmations

 

Backup

Zero power RAM provided backup for data

 

Power consumption

6 VA max.

 

Ambient temperature

0 – 50 °C.

 

Storage temperature

0 – 70 °C.

 

Humidity

90% RH (non-condensing)

 

Security

Single level – Password protected

 

Enclosures

Weatherproof, Flameproof and all other standard types

 

Mounting

Panel / Wall / Field

 

Dimensions

72*144 / 144*144 / SPECIALS

 

*All config/calibration from front keys only

 

  • Following table describes the availability of several models with the company right now. A general preview is only presented to the user. The dimensional and display sizes are the relational virtues of each other and hence the user is always requested to clarify the specifications of instrument with the factory prior to placement of the order.

  • On confirmation with factory, changes of all types in all specifications is possible

 

Model

Mounting & Dimension in mm (H * W * D)

Input

Power

Output option

Indication Options

Display size

Analog output

Contact output

Display resolution

Counter resolution

846V

Panel

















144*72*150

All

All

Yes

Yes

4/4.5 digit

8 digit

½”- ¼” size

144*144*150

All

All

Yes

Yes

4/4.5 digit

8 digit

½” size

Wall

Opttimum

All

All

Yes

Yes

4/4.5 digit

8 digit

Upto 4” size

 
Ordering Information
 

Please confirm the availability of the model by cross checking the table mentioned on the backside.

 

Basic Model No. (Specified by first 3 digits)

846V - Single input type

Flow Indicator Totalizers

DUAL CHANNEL

Mounting & Encl. (Specified by letter following 3 digits)

P - Weatherproof - Panel

W - Weatherproof - Wall

F - Flameproof - Wall / field

I - IP65 grade – wall / field

S - Specials

 

Input for channel 1 (Specified by first digit following the letter)

1 - Current inputs

2 - Voltage inputs

3 - Pulse inputs

S - Special input

Input for channel 2 (Specified by the next digit / letter)

1 - Current inputs

2 - Voltage inputs

3 - Pulse inputs

S - Special input

 

Power option (Specified by the next digit / letter)

1 - 24 V DC

2 - 110 V AC

3 - 230 V AC

4 - 90-270 V AC – SMPS type

S - Specials

Analog O/P for channel 1 (Specified by the next digit / letter)

0 - None

1 - mA/V DC isolated

2 - mA/V DC non-isolated

S - Specials

 

 

Analog O/P for channel 2 (Specified by the next digit / letter)

0 - None

1 - mA/V DC isolated

2 - mA/V DC non-isolated

S - Specials

* It is possible to take output on one channel and not on other.

Contact output for channel 1 (Specified by the next digit / letter)

0 - None

1 - 1NO + 1NC on flow

  1. - 2NO + 2NC on flow

Contact output for channel 2 (Specified by the next digit / letter)

0 - None

1 - 1NO + 1NC on flow

  1. - 2NO + 2NC on flow

Display Resolution for ch-1(Specified by the next digit / letter)

1 - 4 digit instantaneous

4 digit for Eng.units

8 digit totalizer

2 - 4.5 digit instant. Flow

8 digit totalizer

3 - LCD

** Please mention the color of displays clearly

Display Resolution for ch-1(Specified by the next digit / letter)

1 - 4 digit instantaneous

4 digit for Eng.units

8 digit totalizer

2 - 4.5 digit instant. Flow

8 digit totalizer

3 - LCD

** Please mention the color of displays clearly

Serial output (Specified by the next digit / letter)

0 - None

1 - RS232 With modbus RTU

2 - RS485 with modbus RTU

3 - Modem connectivity

4 - GSM connectivity

 

** Customized developments can be made if the quantity permits

 
 

Made in India By:

 

PANTECH INSTRUMENTS,

102, Shailja Complex II,

Akota – Padra Road,

Nr. R. C. Patel Ind. Estate,

Vadodara – 390 020.

Telefax: (265) 2331380/6616080

Mobile: +9198240 16466/ +99242 10722