|
Inputs – 3 nos.
FLOW– 4-20mA / 0-20 mA DC / other linear type
PRESSURE – 4-20 mA / 0-20 mA DC / other linear type
TEMP.- 4-20 mA DC / RTD Pt. 100-3 wire / Thcpl with type
* The user can choose to bypass any of the pressure or temp. signal input incase that compensation not reqd. however in this case, the gas type and its flow calculation is a virtue of its input types totally.
Calculations – fixed
Standard Gas equations
Analog output
-
Isolated / Non Isolated 4 – 20 mA DC
-
Isolated / Non Isolated 0-10 V DC
3) Other types on factory confirmations
Contact output
Maximum 2 sets of C,NC,NO on FLOW RATE
Display (any one type)
-
4 digit red LED for Instant flow rate, 4 digit green LED for Engg. Unit display, 8 digit red LED for totalized value ( LED size : 0.25” ) ( Engg. Units selectable )
Accuracy
+/-0.1% of span
Transmitter Power
3*24 V DC @ 40 mA
Other types on factory confirmations
Power supply
-
24 V DC
-
110 V AC, 50 Hz, +/- 10%
-
230 V AC, 50 Hz, +/- 10%
-
90-270 V AC – SMPS type
-
Specials on factory confirmations
|
|
Backup
Zero power RAM provided backup for data
Power consumption
6 VA max.
Ambient temperature
0 – 50 °C.
Storage temperature
0 – 70 °C.
Humidity
90% RH (non-condensing)
Security
Single level – Password protected
Enclosures
Weatherproof, Flameproof and all other standard types
Mounting
Panel / Wall / Field
Dimensions
96*96 / 72*144 / 144*144 / SPECIALS
*All config/calibration from front keys only
-
Following table describes the availability of several models with the company right now. A general preview is only presented to the user. The dimensional and display sizes are the relational virtues of each other and hence the user is always requested to clarify the specifications of instrument with the factory prior to placement of the order.
-
On confirmation with factory, changes of all types in all specifications is possible
|
